ViconNet - What Tcp - Udp Ports does ViconNet use?
For ViconNet these ports need to be open
TCP: 4354, 4355, 4356, 4357, 4358
UDP: 4354, 4355, 4356, 4357, 4358
To test if these are open on a given machine perform a Telnet test:
From a command prompt enter:
telnet XX.xx.xx.xx 4358 ( xx is ip of system being tested. 4358 is port for the Nucleus)
Port details:
http://www.iana.org lists Vicon Ports on assigned registered port numbers:
- qsnet-trans 4354/tcp QSNet Transmitter
- qsnet-trans 4354/udp QSNet Transmitter
- qsnet-workst 4355/tcp QSNet Workstation
- qsnet-workst 4355/udp QSNet Workstation
- qsnet-assist 4356/tcp QSNet Assistant
- qsnet-assist 4356/udp QSNet Assistant
- qsnet-cond 4357/tcp QSNet Conductor
- qsnet-cond 4357/udp QSNet Conductor
- qsnet-nucl 4358/tcp QSNet Nucleus
- qsnet-nucl 4358/udp QSNet Nucleus
NOTE: This does not cover ports for other devices such as Ionyx and other IP cameras.
A different KB article will detail other ports from non ' ViconNet ' based devices