Corridor mode is supported on most current IQeye cameras. Please check our Product Comparison Matrix or Product Data Sheet if necessary.
Detailed product information can be found at this link: http://www.vicon-security.com/
In addition, please ensure that the firmware on the camera is 4.0 or better.
To enable corridor mode (where supported), navigate to the camera's setup | streams tab in the camera's web configuration pages.
Locate the "rotate clockwise" field and select to rotate 90 degrees or rotate 270 degrees.
NOTES:
Rotate 90 and 270 only available for resolutions 1920x1080 or smaller, so set resolutions accordingly.
Some rotation of actual lens may be needed to adjust for spacial orientation.
Corridor mode is set up on a "per stream" basis, meaning, setting one stream in corridor mode does not force another stream into corridor mode. As an example, Stream 1 can be setup at a 90 degree view and Stream 2 can be setup at a 270 degree view.
If Corridor mode is not what is needed for a specific application (90 degrees and 270 degrees), an alternative is the flip rotate setting on the setup | advanced tab. Unlike corridor mode, this setting affects all available streams on the camera. Default is "none". Options are "180", "horizontal", and "vertical". Allows digital rotation of the image 180 degrees, or flipping the image horizontally or vertically.