V9360-12 -Camera setup for DUAL 180 VIEW FOR VICONNET
TO PROVIDE THIS VIEW IN SINGLE .....
OR MULTI SCREEN IN VICONNET
First:
LOG INTO CAMERA SET DEFAULTS EXCEPT IP.
This will clear out any prior Stream settings and Profiles
SET CAMERA FISHEYE FRONT END DEWARPING, SAVE
STREAMING SETUP, SAVE
HOME, SELECT H.264 STREAM 1
When camera setup is complete, Next on each ViconNet system that needs to view the camera, Exit to OS, go to C:\ViconNet\VNData\Cache , find the file that has the IP of the camera and delete.
Restart ViconNet and click on the site list to display the camera.
------------
NOTES:
. If the camera is ever connected by a system that can alter the camera profiles this can upset the streams in the Camera and views in ViconNet.
. If the camera was connected prior to some other VMS that can create profiles in the camera, you should first set Factory Defaults in the camera to delete those other profiles.
. At that point you should be able to successfully setup the camera for dual 180 view in ViconNet.
Other Reference:
Example of a good cache file in ViconNet C:\ViconNet\VNData\Cache from the camera that will work. This was created by ViconNet when it first connected to a properly configured V9360-12.
Specifically the Profile 1 and 2 are the only expected profiles.
