Vicon IPCConfig Error List
The attached error codes is related to the IPCConfig discovery and configuration tool for Vicon Cameras.
This is related to new SN230 cameras and others. These codes are subject to change.
Error code |
Error description |
Error Handling |
-1 |
Execution failure |
Please contact manufacturers |
1 |
Incorrect IP address |
Please contact manufacturers |
2 |
Net creating error |
The UDP port might be occupied, please reopen IPCConfig |
102 |
No Memory |
Try to close other application program or reboot computer and reopen IPCConfig. |
103 |
Not Initiated |
Init error. Try to reopen IPCConfig. |
104 |
Invalid Parameter |
Wrong parameters may lead to this error. Please check the input parameters. |
106 |
XML file opening failure |
Please contact manufacturers |
107 |
Device cannot be found |
Please check the device status |
108 |
Batch configure boot error |
Please contact manufacturers |
109 |
File read failure |
Please contact manufacturers |
110 |
Upgrade package files do not match |
Update package error, please check the Update package. |
111 |
Batch upgrade startup error |
Please contact manufacturers |
112 |
Illegal IP address |
The IP address length cannot be less than 8bits |
113 |
Parameters inquiring failure |
Please check the communication status . |
114 |
Parameters getting failure |
Please check the communication status or check if the device is supported. |
115 |
Parameters setting failure |
Please check the communication status or check if the device is supported. |
119 |
The protocol not support on parameter config. |
Please contact manufacturers |
120 |
Timeout when parameter config |
May cause by bad connection or device problem, try connect the device again. |
121 |
Failed when starting device import thread |
Please contact manufacturers |
150 |
The file format is invalid |
Update package error, please check the Update package. |
151 |
The CRC check failed |
Update package error, please check the Update package. |
152 |
The length of parameter is too less |
Update package error, please check the Update package. |
153 |
The device Type ID is wrong. |
Update package error, please check the Update package. |
12003 |
Computer offline |
Please check the network connection |
A